Primer for Polyolefins in combination with Instant adhesives

Loxeal-CR2
Loxeal-CR2
Applications
  1. Loxeal CA Remover CR2 is used to remove and clean cured cyanoacrylate adhesive from surfaces, clothing or to debond parts assembled with cyanoacrylate adhesives.
Available pack size 20gms+brush, 50gms+brush, 1litre
Standards REACH,RoHS

Download
TDS

Application
Tips

Specifications

Chemical Composition Mixture of organic esters
Color Clear
Specific Gravity 1.05 g/ml
Viscosity < 20 mPa.s
Shelf Life 1 year
Flash Point > + 100°C

Features and Benefits

Designed to improve operating conditions of operators, with particular care for their health and safety.It does not contain any solvent.
LoxealCR2 doesn’t report on label any risk phrase or symbol because it is not classified as dangerous according to actual directive on dangerous products.

Notes

  • Cynoacrylateremover CR2 applied to cured cyanoacrylate adhesive dissolves the adhesive within several minutes or several hours depending on the amount of adhesive.
  • Thin layers of adhesive can be wiped off with a cloth soaked in Loxeal CR2 remover.
  • Parts already bonded may require several hours of soaking for debonding.
  • Thick beads or drops will take between 30 to 60 minutes to dissolve the adhesive. Re-applying of product could be necessary.